HIOKI CM4375 AC / DC Clamp Meter

Manufaturer:	HIOKI E. E. CORPORATION
Model:	CM4375

Product code

111-50333

Price: Contact

Add to cart Buy now

Call for best price:

+84 935 486 698

+84 988 012 484

*Note: The display price does not include shipping costs.

Description

Designed to be easy to insert into the gap of the cable with a very thin sensor
AC / DC is automatically discriminated and can be measured up to 1000A.
DC voltage can be measured up to 1500V (conditional)
Simultaneous display of effective value of inrush current (INRUSH) and waveform peak
Operating temperature range: -25 ° C to 65 ° C
DC current range: 1000 A (maximum display 999.9 A), basic accuracy / ± 1.3% rdg. ± 0.3 A (at 30.1 A-999.9 A)
AC current range: 1000 A (maximum display 999.9 A, 10 Hz to 1 kHz, true Esquare current rectification), basic accuracy 45-66 Hz / ± 1.3% rdg. ± 0.3 A (at 30.1 A-900.0 A)
Crest factor: 1000 A range / 1.5
DC + AC current range: 1000 A (DC, 10 Hz to 1 kHz, true Esquare current rectification), basic accuracy DC, 45-66 Hz / ± 1.3% rdg. ± 1.3 A (at 30.1 A-900.0 A)
DC power range: 0.0 VA to 1700 kVA (automatically switched according to the voltage range), basic accuracy / ± 2.0% rdg. ± 20 dgt.
DC voltage range: 600.0 mV to 1500 V * 1, 5 range, basic accuracy / ± 0.5% rdg. ± 0.5 mV (at 600 mV)
AC voltage range: 6.000 V to 1000 V, 5 range (15 to 1 kHz, true Esquare current rectification), basic accuracy 45-66 Hz / ± 0.9% rdg. ± 0.013 V (at 6 V)
DC + AC voltage range: 6.000 V to 1000 V, 5 range, basic accuracy DC, 45-66 Hz / ± 1.0% rdg. ± 0.023 V (at 6V)
Resistance range: 600.0 Ω to 600.0 kΩ, 4 ranges, basic accuracy / ± 0.7% rdg. ± 0.5 Ω (at 600 Ω)
Capacitance range: 1.000 μF to 1000 μF, 4 ranges, basic accuracy / ± 1.9% rdg. ± 0.005 μF (at 1 μF)
Frequency range: 9.999 Hz to 999.9 Hz, 3 ranges, basic accuracy / ± 0.1% rdg. ± 0.003 Hz (at 9.999 Hz)
Temperature: (K) -40.0-400.0 ˚C, accuracy / ± 0.5% rdg. ± 3.0 ˚C + temperature probe accuracy addition
Other functions: Continuity check, diode check, AC / DC automatic discrimination, DC current / voltage positive / negative judgment, maximum / minimum / average / peak value maximum / peak value minimum value display, low-pass filter, display value hold, backlight, Auto power save, buzzer sound, zero adjust, etc.
Dustproof and waterproof: IP54 (current measurement during storage or insulation conductor)
Communication interface: None
Power supply: AAA alkaline batteries (LR03) x 2, continuous use time / 40 h (backlight OFF)
Measurable conductor diameter: φ34mm
Minimum jaw cross-section dimension: 9.5 mm (dimensions range from the tip of the jaw to 44 mm)
Dimensions: 65 W x 242 H x 35 Dmm
Mass: 330g
Accessories: Test lead L9207-10 x 1, Carrying case C0203 x 1, AAA alkaline batteries (LR03) x 2, Instruction manual x 1