SHISHIDO ELECTROSTATIC BF-X2ME Tabletop type Ionizer (0.004ppm, 1.4 - 3.5 m3/min)

Features

• Because it employs the HDC-AC method, the discharge needle is resistant to dirt and provides stable static elimination performance over a long period of time.
• Two types of louvers allow you to select the static elimination area.
• The discharge needle experiences minimal wear and dirt, ensuring stable static elimination performance over extended periods.
• The louvers and discharge needle unit can be attached and detached without tools, making maintenance easy.
• Even with prolonged use, the discharge needle experiences very little wear, eliminating the need to replace the needle due to wear.
• The system will notify you of power supply and fan malfunctions with LEDs and error signals.
• The device features a locking mechanism for adjusting its angle, making it less likely to change angle due to vibrations or other factors.

Specification

• Dimensions (mm): 150 x 182 x 76
• Weight (kg): 1
• Ozone generation: 0.004 ppm or less (at a distance of 150 mm)
• Ion balance (at a distance of 300mm, factory setting): ±3V or less
• Air volume: 1.4-3.5m3/min
• Wind speed: 1.5–2.9 m/sec (straight louver distance 300 mm center), 0.1–0.3 m/sec (wide-angle louver distance 300 mm center)
• Input power: DC24V (AC adapter included, compatible with AC100-240V)
• Capacity: 12VA
• Output voltage: ±7,500V0-P
• Accessories: AC adapter, wide-angle louvers, output signal lead wires (set of 2)
• Static elimination time: 1.5 seconds or less (at a distance of 300mm, factory default)
• Operating environment: Ambient temperature: 0-40°C, Ambient humidity: 15-85%RH (non-condensing)
• Filter: Pre-filter grade
• Output signal: MOS FET relay, voltage-free contact output (NC output) (OFF in case of high voltage abnormality or fan malfunction)
• Noise level: 63 dB(A) (at a distance of 1 meter)
• Materials: Body/ABS resin, discharge needle/tungsten, stand/SECC, louvers/PC・ASA