NXP OM11043-598 Microcontroller Module MBED LPC1768

Manufaturer:	NXP
Model:	OM11043-598

Product code

111-66884

Price: Contact

Add to cart Buy now

*This is standard price, please click "Request a quote" to see the actual price.

*You can't find the product you need, please send us the picture/specifications/model/product code and quantity you need to email: [email protected]. We will find it for you.

Description

The MBED microcontroller module OM11043-598 can use the mbed compiler. The development environment is a web application available on the Internet. As long as you have a computer connected to the Internet, whether it is Windows, Mac, or Linux, you can start programming immediately. Programming is done in C++. The onboard processor is the NXP LPC1768. It is based on the ARM Cortex-M3 Core. It has Ethernet, USB device, CAN, SPI, I2C, etc. as interfaces. It has 512KB flash memory and 64KB RAM, and operates at 96MHz.
[mbed compiler]
The mbed compiler is supported, and you can write programs in C++. Compile to create a load module (.bin file), download to the mbed microcontroller, and run it. The development environment is all online and connected to the Internet. You don't need to install or configure anything to use mbed.
【package】
40-pin DIP package
Pitch is 2.54mm, pin spacing is 0.9 inches
Size: 44mm x 26mm
[Power supply requirements]
USB or 4.5V to 9.0V to Vin, less than 200mA (up to 100mA without Ethernet)
VB: Real-time clock power backup input
Real-time clock can operate from 1.8V to 3.3V
Operates at 27uA; can be powered by lithium coin cell
Regulated 3.3V power output on VOUT to peripheral devices
5.0V from USB can be used from VU (only when connected via USB!)
Maximum allowable current is 500mA
Digital IO pins are rated at 3.3V, 40mA/pin, for a total of 400mA
【pin】
Vin: Power supply to the board
4.5V to 9.0V, 100mA + external circuitry powered by microcontroller
Vb: Battery backup to the real-time clock
1.8V to 3.3V, 30uA
nR: Reset pin (active low) with the same function as the reset button
There is a pull-up resistor on the board so it will work with an open collector as well.
IF+/-: Reserved for future use. *For detailed specifications on the mbed microcontroller module, please see here.