NIHON PISCO UB1280-100-BU Polyurethane Tubings (Blue, 12 x 8mm, 100m)

Features

• Excellent flexibility.
• Suitable for general pneumatic piping requiring small bending radii.
• The tube has convenient cut marks at approximately 500mm intervals for easy cutting.

Specification

• Color: Blue
• Outer diameter (mm): 12
• Inner diameter (mm): 8
• Minimum bending radius (mm): 30
• Total length (m): 100
• Fluids used: Air, water (under certain conditions)
• Operating vacuum pressure (MPa): -0.1
• Total length (mm): 100
• Maximum operating pressure: 1.0 MPa (at 20°C and 65% RH)
• Operating vacuum pressure: -100kPa
• Operating temperature range: -20 to 70°C for air (non-freezing), -15 to 60°C for water (non-freezing)
• Complies with the positive list (Does not comply with the Food Sanitation Act)
• Material/Finish: TPU (Thermoplastic Polyurethane)
• Avoid applying stress to the tube, such as tension, twisting, or extreme bending. This may cause the tube to collapse, burst, or detach.
• Avoid rubbing or tangling the tube to prevent damage, as this could cause the tube to burst.
• The burst pressure of the tube decreases with increasing temperature, so be sure to understand the operating pressure and allow for a sufficient safety margin.
• Please use the tube at a bending radius greater than or equal to the minimum bending radius.
• When laying the tubing, please allow for sufficient slack to account for changes in length, etc.
• Country of origin: Japan
• Code number: 818-2356