Microchip Technology BQ2540-9RG BEL POWER SOLUTIONS INC Q 120W Isolated DC-DC Converter Rack Mount

Manufaturer:	Microchip Technology
Model:	BQ2540-9RG

Product code

111-66450

Price: Contact

Add to cart Buy now

*This is standard price, please click "Request a quote" to see the actual price.

*You can't find the product you need, please send us the picture/specifications/model/product code and quantity you need to email: info@qtetech.com.vn. We will find it for you.

Description

Power-One 66W to 132W Single/Dual Output Isolated Regulated DC-DC Converters - Q Series
Q series miniature DC-DC converters provide all the input and output filtering, signaling and protection required for most applications. These converters offer flexible output power, high efficiency and reliability, low levels of ripple and RFI noise, full input/input isolation, low inrush current, over-temperature protection and over-voltage/under-voltage lockout. These DC-DC converters are designed for 19" DIN rack systems but can also be chassis mounted using four M3 screws.
One or two isolated outputs that can be connected in series or parallel to provide preset voltages from 5.1 to 48 Vdc Ideal for harsh environments Excellent surge/transient protection Compliant with European railway standards EN50155 and EN50121-3-2 Designed for 19" DIN rack systems in 3U/4TE, but can also be chassis mounted with 4 screws Fully enclosed in a black coated aluminum case that acts as a heat sink and RFI shield, ideal for low temperature wall mounting Conformal coating provides high level of protection against humidity and conductive dust Supports hot plug and current sharing for redundant configurations Low inrush current, hot swappable. 48 V input product compliant with communication standard ETS300132-2 Features include wide trim range, output OK signal and inhibit Dimensions: H111 x W20 x L172 mm Weight: 480 g Minimum dielectric strength: 4.2 kV
Regulated Output 2
Vo2 depends on the load conditions. If each output is loaded at least 10% of Io nominal, Vo2 will only deviate by ±5% of Vo nominal. Figures 12, 13, and 14 on page 14 of the accompanying datasheet explain the various load regulations leading up to the current limit. If Io1 = Io2 or two outputs are in series, Vo2 will deviate by ±1% of Vo nominal, assuming the load is at least the minimum of Io.
Quantity: 1 piece
Output voltage: 15V dc
Input voltage range: 14.4 → 36 V dc
Input voltage nominal: 24 V dc
Isolation voltage: 4.2kV
Rated power: 120W
Output current: 4A
Mounting type: Rack mount
Number of outputs: 2
Medical certification: No
Railway approved: yes
Load regulation: ±1%
Maximum temperature: +71°C
Series: Q
RoHS Compliance Status: Not Compliant
Code number: 716-6116