Frequently Asked Questions on Flo Fluororesin Glass Cloth Adhesive Tape AGF-100 FR:

1. What is Flo Fluororesin Glass Cloth Adhesive Tape AGF-100 FR?

Flo AGF-100 FR is a high-performance adhesive tape from Chukoh Chemical Industries. It uses PTFE-impregnated glass cloth as its base and a one-side silicone adhesive, combining non-stick, low-friction, chemical resistance, heat resistance, and electrical insulation properties.

2. What materials and construction make up AGF-100 FR?

The tape consists of a glass cloth substrate fully impregnated with fluoroplastic (Teflon™ PTFE) and coated on one side with heat-resistant, chemically resistant silicone adhesive. PE cores or release-paper versions are also available.

3. What are the standard dimensions and product code?

The standard product code is AGF-100 FR. The nominal total thickness is 0.15 mm, standard width is 150 mm, and length 10 m, wound on a 3-inch PE core. Custom widths up to 560 mm and other core options can be ordered.

4. What are the key performance specifications?

For the 0.15 mm thickness, typical measured values are:

Adhesion (180° peel): 11 N/25 mm

Tensile strength: 530 N/25 mm

Dielectric breakdown voltage: 6 kV

Maximum continuous service temperature: 200 °C

5. What temperature range can AGF-100 FR withstand?

AGF-100 FR is rated for continuous operation from -60 °C up to +200 °C, making it suitable for both deep-freeze processes and high-heat applications.

6. What certifications and compliance standards does it meet?

The tape is UL510A certified and complies with Japan’s Food Sanitation Act (effective June 2020). It also meets RoHS requirements for lead-free and halogen-free use when specified.

7. What are the most common applications?

Typical uses include:

Release liners in heat sealers and vacuum packaging machines

Insulating wrap or protective cover in electrical and electronic assembly

Non-stick surfaces in resin molding and coating processes

Slip-resistant or wear-resistant protection in automated food or component handling lines

8. How should I apply and remove the tape?

Ensure the surface is clean, dry, and free of oils or debris. Align the tape and press firmly with a roller or squeegee. To remove, peel back slowly at a 45°–90° angle to minimize adhesive residue.

9. How should AGF-100 FR be stored?

Store in a cool, dry area away from direct sunlight and heat sources. Ideal conditions are 5 °C–25 °C with relative humidity under 60%. Keep rolls in their original packaging until use.

10. Can I order custom widths, lengths, or core types?

Yes. Standard widths range from 10 mm to 300 mm, with maximum slit widths up to 560 mm. PE cores, 3-inch cores, or release-paper constructions and longer roll lengths are available upon request.

11. Is AGF-100 FR safe for food contact?

Yes. The tape complies with Japan’s Food Sanitation Act Amendment effective June 1, 2020, making it suitable for applications involving indirect food contact, such as packaging and sealing equipment.

12. Can this tape be used for medical or body-contact applications?

No. Chukoh advises against medical or direct human-contact use. Always observe relevant regulations and dispose of the product per local guidelines.

Chukoh recommends using the tape within 12 months of manufacture. Before application, inspect a sample for adhesive consistency, uniform thickness, and absence of discoloration or cracks.

14. What distinguishes AGF-100 FR from AGF-100?

While both use PTFE-impregnated glass cloth, the FR version features enhanced silicone adhesive for higher peel strength, lower friction, and superior chemical-resistance properties compared to the standard AGF-100.