ASAHI ENGINEERING 1053 EAZY WELD Aluminum rod (For welding and repairing aluminum)

Manufaturer:	ASAHI ENGINEERING
Model:	1053

Product code

111-58969

Price 130.85 USD

Add to cart Buy now

*This is standard price, please click "Request a quote" to see the actual price.

*You can't find the product you need, please send us the picture/specifications/model/product code and quantity you need to email: info@qtetech.com.vn. We will find it for you.

Description

It is a simple welding kit that does not require equipment and can be quickly worked anywhere as long as there is a gas burner.
You can get better results by checking the proper temperature with an infrared thermometer and working.
Keep the base metal at the proper rod melting temperature.
Rub the rod against the base material and melt the rod at the temperature of the base material for repair work.
Let it cool naturally for about 1 minute until the melted rod loses its luster.
Heat the base metal to the working temperature of the various rods (welding rods).
For welding and repairing aluminum.
Tensile Strength (PSI): 39000
Compressive Strength (PSI): 60000
Shear Strength (PSI): 34000
Conductivity (%IACS): 24.9
2 rods for aluminum
Maximum operating temperature (°C): 391
Dimensions (mm): φ3×450mm
Easy Welding Kit Aluminum Kit EWK-AL
2 aluminum rods + 1 dedicated burner + 1 dedicated cylinder + 1 wire brush
About 5 times stronger than soldering
Material/Finish: Aluminum, Zinc, Copper, Magnesium
Set contents/accessories: 2 aluminum rods (AL450), 1 special burner (840S), 1 cylinder (860Z), 1 wire brush (SWB)
Caution: Working with scraped iron scraps left behind may cause corrosion. Be careful not to overheat the base material and melt it. Do not apply fire directly to the rod (welding rod). Sudden cooling with water, etc., will significantly reduce the strength. It is very dangerous because it will splatter if air blow is done while it is not hardened. If it overheats (too hot), it will repel and stop welding. For aluminum with a thickness exceeding 5mm, it is very difficult to secure the working temperature with the attached gas burner, so please use acetylene gas. If the temperature of the base material is difficult to rise, placing a refractory brick under the base material will improve efficiency.
Country of Origin: USA
Code number: 836-6217