ASAHI ENGINEERING 1002 Repair Tape (SILICONE RUBBER, 50.8mm x 11m)

Manufaturer:	ASAHI ENGINEERING
Model:	1002

Product code

111-59807

Price 163.56 USD

Add to cart Buy now

*This is standard price, please click "Request a quote" to see the actual price.

*You can't find the product you need, please send us the picture/specifications/model/product code and quantity you need to email: info@qtetech.com.vn. We will find it for you.

Description

The repair tape is made from a special silicone material and does not use adhesive, so it does not leave any marks.
Follows irregular shapes of objects with 300% elongation.
It insulates up to a high voltage of 8,000 V and does not melt up to a high temperature of 260 degrees.
After bonding, it is permanently impervious to air and water.
For a wide range of applications such as air leaks, water leaks, steam leaks, insulation, corrosion prevention, and bundling.
Color: Black
Width (mm): 50.8
Length (m): 11
Thickness (mm): 0.8
Operating temperature range (°C): -65°C to 260°C (intermittent use)
Operating temperature range (°C): -65°C to 260°C (intermittent use)
Specific Gravity: 1.2+/-0.03
Tension: 700psi
Extensibility: 300%
Tear Strength: 85psi
Adhesion Strength: 2lbs
Water absorption: 3% or less
Dielectric strength: 8000V (converted to 0.5mm thickness)
[General performance and characteristics] Moisture resistance: Excellent UV resistance: Excellent Electrical insulation: Excellent Ozone resistance: Excellent Elasticity: Excellent Rust prevention: Excellent High temperature: Excellent Dissolution resistance: Good Flame resistance: Good Acid resistance: Good - Fair Abrasion resistance : Good Oil resistance: Good - Acceptable
Food Sanitation Act: Compliant with No. 370
Meets MIL standard: AA-59163A
Operating temperature range: -45°C to 200°C (continuous)
Material/Finish:
silicon
Note:
Before use, wipe off the dirt on the part to be wrapped as cleanly as possible.
Only water and air can be used as a tape alone to prevent leaks.
It is not recommended to rewrap the repair tape in areas where pressure is applied, as it will weaken the strength.
If the pressure is within 0.6Mpa, it is possible to stop leakage even under pressure.
If the pressure is 0.6Mpa or more, it is possible to prevent leakage up to 1Mpa by reducing the pressure to within 0.6Mpa and then wrapping it tightly 4 to 5 times.
Country of Origin: USA
Code number: 113-2670